Instructions for use\u00a0<\/b><\/p>\n
1.Installed gravel cleaner,please keep the water level between the MAX and MIN,then strat switch.When the outlet can draw water,raise the gravel cleaner,let the head and outlet above the water.\u00a0<\/p>\n
2.Idle spin out of water can’t beyond one minute.\u00a0<\/p>\n
3.Batteries must be installed on the right way.\u00a0<\/p>\n
4.The collect dirt bag should be clean after gravel cleaning each time<\/p>\n<\/p>\n
Tips:<\/i><\/p>\n
Why can not pump<\/b><\/p>\n
The cleaner pumping function is work by siphon effect.<\/p>\n
Put the start water line which below the handle into water when you use the cleaner and turn on the switch.<\/p>\n
If the water level is really too low, you can take out the No. 2\/3\/4 extension tube and pump directly by the No. 1 sand-washer mainframe.<\/p>\n
Please be careful avoid over the water level above the guard line.<\/p>\n
About the suction<\/b><\/p>\n
You can remove the gravel cleaner when clean the fish manure\uff0cand pump by pipe directly<\/p>\n
Please note<\/b><\/p>\n
The main function of the Fish Tank Vacuum Cleaner\u00a0 is aquarium drainage,filter dirt and clean the fish tank<\/p>\n
<\/p>\n